VSA300

1. single grinding wheel structure machine: adjacent grinding wheel forward and reverse high-speed rotation, the whole combination of low-speed public rotation and left and right scurry, through grinding, brushing, sweeping, thwarting and other actions, all-round removal of workpiece residual burrs and chamfering. The surface roughness Ra0.5-2.5, R angle 0.2-1.5, cutting volume 1-20um, the precision is adjustable and controllable.

2. Combined version of the equipment consists of abrasive belt + abrasive wire wheel combination structure. The abrasive belt rotates at high speed and scurries quickly to grind the surface of the workpiece to remove the large burrs and slag from the flanged edges, and then remove the edges and round the corners through the grinding head of the grinding wheel.

3. The grinding wheel head is made of soft material, which can be inserted into the groove hole of the workpiece to remove the inward burr and does not affect the surface accuracy of the workpiece, and only removes the edge burr of the hole for the plate with film on the surface without hurting the surface film.

The equipment is developed and manufactured by Wanchuang independently, and Wanchuang has completely independent intellectual property rights, the whole machine has been authorized to patent, and imitation is prohibited.

Scope Of Application: metal non-metal sheet laser (flame) cutting, stamping, cutting and other workpiece pieces of all-around dead-end deburring, de-slagging, chamfering; metal plate surface grinding and drawing, rust removal to oxidation skin and other process processing;

Equipment Specifications And Processing Range: VSA1360 type processing width ≤ 1350mm; VSA1060 type processing width ≤ 1050mm; VSA860 type processing width ≤ 850mm; VSA300V-2SP processing width ≤ 200mm; minimum processing length and width or diameter 30*50mm; processing thickness 0.5-50mm; conveying speed 0-5m/ min min variable frequency adjustable;

Grinding Head Speed: 500-180OR/min, control system: human-machine interface, PLC programming control, one key to start and stop the equipment; power supply voltage: three-phase five-wire, 380V, 50HZ;

Rated Power: 15-35KW; Total weight (approx.): 1-6T; Appearance size (length, width and height): 2500-3500mm*1200-1800mm*1500-2300mm

Control System: human-machine interface, PLC programming control, one key to start and stop the equipment; power supply voltage: three-phase five-wire, 380V, 50HZ;

Equipment Support Customization: can customize the sanding belt + sanding wheel combination machine, can customize the vacuum adsorption or strong magnetic adsorption, customize the series of cylinder conveying.